Self Powering, Stand alone Watermaker (NO external power source required)

Features:

• Sturdy polyethylene shell with removable front hatch for easy access.
• Honda GXH50 50cc, 1600W (2.1 hp) petrol (gasoline) powered engine.
• Pre-filter and housing externally mounted for ease of service.
• Jabsco impeller pump to lift water and provide positive pressure to the high pressure pump.
• General Pump WM series 316 stainless steel high pressure pump, the workhorse of the RO industry.
• General Pump relief valve to prevent overpressurisation and allow for pressure washing.
• Sturdy 3 metre draw hose fitted with one way valve so it remains primed, with detachable strainer.
• High pressure stainless steel quick couple outlet for connection RO membrane unit or pressure washer gun.
• Five 5 micron pleated paper pre-filter cartridges included.
• 1kg (2.2 lb) bag pickling solution powder included.
• Couples with one of our reverse osmosis membranes
• Can also be coupled with RO membranes from other suppliers.
• Dimensions: Length 595mm (23.4″), Width 310mm (12.2″), Height 450mm (17.7″)
• Weight: 26.5kg (58.3lb)

The Membranes Details fro this system.

• Two 40″ Dow Filmtec RO membranes will produce 100 to 140 litres per hour (23 to 32 gph), depending on source water temperature and salinity.
• If desired, it the entire case can be permanently mounted, or internal system can be removed and installed with included rubber mounts.
• All salt water plumbing is 316 stainless steel.
• Quality fluid filled pressure gauge.
• 316 stainless steel pressure valve for long life.
• Rugged polyethylene case.
• 5 metre (16 ft) input hose with quick fit connector for connection to pressure supply unit, won’t mark your deck.
• 3 metre (10 ft) food grade polyurethane fresh water delivery hose.
• 10 metre (33 ft) food grade polyurethane extension hose for reaching your forward water tank.
• 3 metre (10 ft) brine waste hose.
• Dimensions: Length 1,180mm (46.5″), Width 130mm (5.1″), Height 250mm (9.8″).
• Weight: 23.5kg (52lb).